06-13-2021, 05:28 AM
(This post was last modified: 06-13-2021, 06:17 AM by Redpiperbob.)
Hi Norman
Thanks for that I will give that a try.
Can you tell me the firmware I should use with these scales
https://www.machine-dro.co.uk/m-sure-ms-...0mm-8-inch
I was going to use the Mixed ie digitalReadout_Universal_V1.0.txt
Is this the correct one ?
OK just tried the wiring as the link you sent still no joy.
On the tablet if I look at the bluetooth then I get the x0,y0,z0,w0, but altering the scales does nothing in the dro app.
OK progressI found an old scale in the bottom of the draw and if I fit it to the adapter the app works So I guess the scales I have will not work with the adapter boards.
can someone in the UK point me to scales that will work with the MSP430 ?
Thanks
Bob
Thanks for that I will give that a try.
Can you tell me the firmware I should use with these scales
https://www.machine-dro.co.uk/m-sure-ms-...0mm-8-inch
I was going to use the Mixed ie digitalReadout_Universal_V1.0.txt
Is this the correct one ?
OK just tried the wiring as the link you sent still no joy.
On the tablet if I look at the bluetooth then I get the x0,y0,z0,w0, but altering the scales does nothing in the dro app.
OK progressI found an old scale in the bottom of the draw and if I fit it to the adapter the app works So I guess the scales I have will not work with the adapter boards.
can someone in the UK point me to scales that will work with the MSP430 ?
Thanks
Bob