Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
X axis not working correctly
#1
I have built a system for my lathe using "Chinese" scales. If I connect my level shifter outputs to 2.1/2.4 and 2.2/2.3 on the MSP everything works well. If I connect the level shifted output of either scale to 2.0/2.5 the display is very erratic. As I move the reader head I may increment on the display but then suddenly show a totally different number. With continuing movement this may increment then suddenly change again. It does not matter which scale is connected to which level shifter, the problem solely relates to the "X" inputs. I am currently using Y and Z but this means that dia/rad is not available. The MSP software is "Mixed Scale Firmware 0.3".
Any assistance would be appreciated.

Richard
Reply


Messages In This Thread
X axis not working correctly - by edeeec - 01-03-2017, 09:50 AM
RE: X axis not working correctly - by edeeec - 01-08-2017, 04:56 PM
RE: X axis not working correctly - by Yuriy - 01-10-2017, 03:27 AM
RE: X axis not working correctly - by edeeec - 01-11-2017, 09:41 AM
RE: X axis not working correctly - by edeeec - 01-28-2017, 04:15 PM
RE: X axis not working correctly - by Yuriy - 01-30-2017, 05:41 PM
RE: X axis not working correctly - by edeeec - 02-05-2017, 03:23 PM
RE: X axis not working correctly - by edeeec - 02-23-2017, 08:37 AM
RE: X axis not working correctly - by Yuriy - 02-24-2017, 03:26 PM
RE: X axis not working correctly - by edeeec - 02-25-2017, 03:08 PM
RE: X axis not working correctly - by Yuriy - 02-25-2017, 04:39 PM
RE: X axis not working correctly - by edeeec - 02-27-2017, 08:43 AM
RE: X axis not working correctly - by Yuriy - 02-27-2017, 03:25 PM
RE: X axis not working correctly - by edeeec - 03-11-2017, 06:58 PM
RE: X axis not working correctly - by edeeec - 03-22-2017, 09:53 PM
RE: X axis not working correctly - by Briney Eye - 03-22-2017, 09:59 PM
RE: X axis not working correctly - by heavyg603 - 03-26-2017, 12:59 AM
RE: X axis not working correctly - by Briney Eye - 03-26-2017, 10:58 PM
RE: X axis not working correctly - by keesk - 10-10-2017, 01:04 PM
RE: X axis not working correctly - by Philcobt - 02-26-2018, 11:26 PM
RE: X axis not working correctly - by Yuriy - 02-27-2018, 02:30 AM
RE: X axis not working correctly - by Philcobt - 02-27-2018, 04:05 PM
RE: X axis not working correctly - by qtron - 06-28-2018, 03:44 PM
RE: X axis not working correctly - by qtron - 10-29-2020, 12:27 PM
RE: X axis not working correctly - by Yuriy - 10-29-2020, 05:00 PM
RE: X axis not working correctly - by qtron - 10-30-2020, 01:02 AM

Forum Jump:


Users browsing this thread: 2 Guest(s)