Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
X axis not working correctly
#26
Thankyou for the reply Yuriy .. did post #22 get answered? A bit disconcerting.
My f/w ver 1.0, board is Rev 1.2
Other msp430 already swapped out, tested. Same issue.
Assembled & tested by a professional tech. Double checked.
X axis, Z axis also exhibits same symptoms but not as bad as Y axis, which is a consistent fault.
Page 2 of this thread others have binned the project due to being left w no answers..
I havent given up on U!!
(Red LED's are across the vcc's to all scales to constrain vcc's to 1.60 V Max. Didnt help tho.
Where do I find the board wiring schematic?
- Just a good screenshot will do
Reply


Messages In This Thread
X axis not working correctly - by edeeec - 01-03-2017, 09:50 AM
RE: X axis not working correctly - by edeeec - 01-08-2017, 04:56 PM
RE: X axis not working correctly - by Yuriy - 01-10-2017, 03:27 AM
RE: X axis not working correctly - by edeeec - 01-11-2017, 09:41 AM
RE: X axis not working correctly - by edeeec - 01-28-2017, 04:15 PM
RE: X axis not working correctly - by Yuriy - 01-30-2017, 05:41 PM
RE: X axis not working correctly - by edeeec - 02-05-2017, 03:23 PM
RE: X axis not working correctly - by edeeec - 02-23-2017, 08:37 AM
RE: X axis not working correctly - by Yuriy - 02-24-2017, 03:26 PM
RE: X axis not working correctly - by edeeec - 02-25-2017, 03:08 PM
RE: X axis not working correctly - by Yuriy - 02-25-2017, 04:39 PM
RE: X axis not working correctly - by edeeec - 02-27-2017, 08:43 AM
RE: X axis not working correctly - by Yuriy - 02-27-2017, 03:25 PM
RE: X axis not working correctly - by edeeec - 03-11-2017, 06:58 PM
RE: X axis not working correctly - by edeeec - 03-22-2017, 09:53 PM
RE: X axis not working correctly - by Briney Eye - 03-22-2017, 09:59 PM
RE: X axis not working correctly - by heavyg603 - 03-26-2017, 12:59 AM
RE: X axis not working correctly - by Briney Eye - 03-26-2017, 10:58 PM
RE: X axis not working correctly - by keesk - 10-10-2017, 01:04 PM
RE: X axis not working correctly - by Philcobt - 02-26-2018, 11:26 PM
RE: X axis not working correctly - by Yuriy - 02-27-2018, 02:30 AM
RE: X axis not working correctly - by Philcobt - 02-27-2018, 04:05 PM
RE: X axis not working correctly - by qtron - 06-28-2018, 03:44 PM
RE: X axis not working correctly - by qtron - 10-29-2020, 12:27 PM
RE: X axis not working correctly - by Yuriy - 10-29-2020, 05:00 PM
RE: X axis not working correctly - by qtron - 10-30-2020, 01:02 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)