Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ac power adapter
#1
I just purchased the new touchdro for Igaging  and was wondering if someone could recommend a ac adapter to use with it . i looking for a name and model of one to purchase that will work with the touchdro adapter.
Reply
#2
If you got a pre-made board, you can use any Micro-USB phone charger.
Reply
#3
Im found a samsung phone charger today. When I plugged it in to my new premade board it over heats and doesnt connect to the galaxy tablet. Is this a problerm with the new board or did I do something wrong?
Reply
#4
Did you plug it into the power input or one of the scale inputs?
Reply
#5
I plugged it in the right spot but it connects for a second and then disconnects. The case gets hot above the plug in outlet. I think something isnt right
Reply
#6
What happens if you do not have the scales attached to the board when you power it up? If it is ok, then plug in the scales one at a time and see if any single scale (or combination of scales) causes it to heats up.
Reply
#7
I tried disconnecting the xyz axis and and it still overheats and doesnt connect. I think Im sunk
Reply
#8
Where are you located? I.e. is sending a board to me an option?
Reply
#9
Yurly Im located in Pennsylvania. Sending the board would be no problem. Thanks for considering this.
Reply
#10
Yuriy
Could you send me an address to send the board to you.
Thanks again
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)