Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Arduino firmware
#1
Can someone deliver me the arduino sketch for the touchDRO app pls.
I noticed that it is not available in the download section anymore, but since my "DIY quadrature encoder for less than 50€" project is based on arduino and it is finally  taking shape I have to re-write it and an example would come in handy.

I allready have done this once but I lost it with new pc...

Thx in advance.
Reply
#2
Hi,

Yuriy doesn't support arduino based interfaces anymore. But it's not a lost cause - This chap has done a great job of updating the sketch to include all of the current functionality on the MSP based units.

http://www.rysium.com/rysium.docs/

I'm running the latest version (5.11) on my lathe and mill DROs and it works great.

Jason.
Reply
#3
Hi,

voilà la version 5.1 arduino

Georges



.zip   v511.zip (Size: 8.79 KB / Downloads: 44)
Reply
#4
Very pleased with the TouchDRO using the 5.11 sketch as posted here! Thank you so much as I feared my project dead without support. All is good so far with all three scales working perfectly. The HC-06 connects 100 percent.
Now.... tach and touch probe......
I presume the digital inputs are capable to 5v? So the tach would be a 5v pulse?
The touch probe would also be 5v on contact? Where does it appear on the app?
TIA
Cheers
Walter
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)