Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Which TouchDRO for Shahe 5403-xxxF?
#1
I'd like to use these Shahe 5403-xxxF scales on my G704-type mill. Which TouchDRO board should I buy? Will I need any sort of firmware updates to use these scales?

Aliexpress link to the scales I'm looking at: https://www.aliexpress.com/item/32869000211.html
Reply
#2
This is the one you need but you need to check the xxxF is the same as the xxxA

https://www.touchdro.com/store/diy-dro-a...cales.html

TouchDRO adapter for Shahe scales supports Shahe 5403-xxxA scales, also known as the "Digital Linear Scales with Remote Square Display" which use Mini-USB cables.

Yuri responds a lot quicker on Facebook if you want confirmation on the A vs F question
Reply
#3
(08-31-2020, 03:33 PM)kommando Wrote: This is the one you need but you need to check the xxxF is the same as the xxxA

https://www.touchdro.com/store/diy-dro-a...cales.html

TouchDRO adapter for Shahe scales supports Shahe 5403-xxxA scales, also known as the "Digital Linear Scales with Remote Square Display" which use Mini-USB cables.

Yuri responds a lot quicker on Facebook if you want confirmation on the A vs F question

Yes, that is what I'm wanting to know, if the xxxF is compatible with that one.

Is there a specific Facebook group, or just the TouchDRO page? I tried through the TouchDRO page awhile ago, but got no response.
Reply
#4
Try to PM Yuri on this site, or track down some XXXA scales, likely a first version and they are now onto their 6th version.
Reply
#5
(09-01-2020, 06:06 PM)kommando Wrote: Try to PM Yuri on this site, or track down some XXXA scales, likely a first version and they are now onto their 6th version.

Will do, thanks.
Reply
#6
(09-01-2020, 06:18 PM)Toby Wrote:
(09-01-2020, 06:06 PM)kommando Wrote: Try to PM Yuri on this site, or track down some XXXA scales, likely a first version and they are now onto their 6th version.

Will do, thanks.

Were  you able get a response from Yuri or anyone else on this question on the 5403-XXXF scales as I am considering the same scales?
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)