|
arceurotrade dro
|
03-02-2018, 01:36 PM
I want this DRO to connect to android. Which controller would it work?
http://www.arceurotrade.co.uk/Catalogue/...m-to-300mm Thank you in advance too!
03-03-2018, 09:50 AM
hi check YOUTUBE [ FIREBIRD4721] he is using scales you want to use good luck ted smith
03-03-2018, 11:06 AM
(This post was last modified: 03-03-2018, 11:07 AM by GreatOldOne.)
Hi Tom
I use these scales on my lathe and also had them on my old milling machine. http://www.arceurotrade.co.uk/Catalogue/...te-Display I have them hooked up to a home made arduino based controller: http://www.yuriystoys.com/p/arduino-basi...oller.html but they will work with the standard / basic MSP430 controller as they use the same output format as the iguaging scales http://www.yuriystoys.com/2016/01/touchd...aging.html Hope that helps, Jason
I bought this dro then I can use this with MSP430 LaunchPad Basic. It's right?
I bought from here: http://www.arceurotrade.co.uk.
03-11-2018, 09:18 AM
I have some questions about parts
I bought MSP430. Do not know if they will work? https://www.amazon.de/gp/product/B00PL7S...VAXJ&psc=1 https://www.amazon.de/MagiDeal-Breakout-...kout+Board What do you think? Other question, Does HC-05 bluetooth work with it? (03-23-2018, 07:42 PM)Tomizom Wrote: I have some questions about partsBe careful! The break out board you linked to is Mini USB, not Micro USB. I have the same scales and my scales came with Micro USB, so you might want to check yours again. The bluetooth module should work but it looks a tad over priced. I am saying "should work" as I tried forever to hook up a similar HC-06 module but turned out it was faulty. I bought a second one which worked right away. I can't recall if the HC-05 will work but if you search for it on Yuri's site there might be more info. |
|
« Next Oldest | Next Newest »
|
