01-01-2018, 08:16 PM
I went with an infrared "proximity" sensor for the tach. It was a lot easier to stick pieces of reflective tape on my spindle than deal with magnets. It required a little careful tweaking, but has been working great for months now.
There is more than one type, and I actually have an assortment that I intend to try out one of these days to compare ease/difficulty of installation and adjustment, but the first one I tried works so well that I lack a strong incentive.
I used one of these that you can get from Amazon 10 for $10:
https://www.amazon.com/OSOYOO-Infrared-O...ity+sensor
I made a video of my TouchDRO installation (tach is about 13 minutes in):
https://www.youtube.com/watch?v=YwuZf1M6ycQ
There is more than one type, and I actually have an assortment that I intend to try out one of these days to compare ease/difficulty of installation and adjustment, but the first one I tried works so well that I lack a strong incentive.
I used one of these that you can get from Amazon 10 for $10:
https://www.amazon.com/OSOYOO-Infrared-O...ity+sensor
I made a video of my TouchDRO installation (tach is about 13 minutes in):
https://www.youtube.com/watch?v=YwuZf1M6ycQ