10-12-2017, 07:02 PM
I'm not sure if this has come up before, I didn't see anything but...
My readout shifts left to right back and forth repeatedly when one axis is zeroed if the other axes are positive. Seems to be because the one zeroed axis goes from 0.000X to -0.000X due to natural noise in the system, so when it's negative it shifts all the readout lines to the right to make room for the "-", and then when it goes positive the "-" dissapears and it shifts everything left. This happens very rapidly and makes the display fairly difficult to read. And it's annoying
Any way on a future version to leave the "space" always there to the left of the position readouts, regardless of whether there's a "-" in it or not, or just stick a "+" in there when positive to hold the space?
Thanks!
My readout shifts left to right back and forth repeatedly when one axis is zeroed if the other axes are positive. Seems to be because the one zeroed axis goes from 0.000X to -0.000X due to natural noise in the system, so when it's negative it shifts all the readout lines to the right to make room for the "-", and then when it goes positive the "-" dissapears and it shifts everything left. This happens very rapidly and makes the display fairly difficult to read. And it's annoying
Any way on a future version to leave the "space" always there to the left of the position readouts, regardless of whether there's a "-" in it or not, or just stick a "+" in there when positive to hold the space?
Thanks!