Negative sign

[Georges GUAL]

Hello Yuriy,
When my caliper goes below zero, the negative sign does not appear.
Is there a manipulation to do in Touchdro?
Thank you
cordially
Georges

Bonjour Yuriy,
Lorsque mon caliper passe en dessous de zéro, le signe négatif ne s'affiche pas.
Y a t-il une manipulation à faire dans Touchdro ?
Merci
Cordialement
Georges

[Briney Eye]

As far as I could determine using an oscilloscope, the BIN6 outputs from the caliper-type scales are not interpreted correctly on Yuriy's end. I gave up and got some Shars/Shahe/AccuRemote scales. It was just less aggravation that way (and the finished project is a lot better). You can see how it all came out at https://youtu.be/YwuZf1M6ycQ.

[Georges GUAL]

Hello,
Thanks for the information.
I asked the question because the negative sign of the BIN6 is well interpreted in versions V0.2 V0.3 of Yuriy and is displayed well on Touchdro.
Why does V1.0 not do it?
cordially
Georges

Bonjour,
Merci pour l'information.
Je posais la question car le signe négatif des BIN6 est bien interprété dans les versions V0.2 V0.3 de Yuriy et s'affiche bien sur Touchdro.
Pourquoi la V1.0 ne le fait pas ?
Cordialement
Georges