Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Shars scales to TouchDRO?
#1
I have a 3 axis display on my mill and would prefer to use TouchDRO. Wold this be possible with the MSP controller?
Help me please?!! :-)
Walter
Reply
#2
What kind of scales do you have?
Regards,
Brian
Reply
#3
(03-17-2017, 12:14 PM)Eskimo2k Wrote: What kind of scales do you have?

SHARS, they have a display like a caliper and cables to a three axis display.
Reply
#4
Shars has magnetic as well as glass scales. Which type do you have?
Regards,
Brian
Reply
#5
Walter,
Have you figured out what type of scale you have?
But to cut to the chase, yes, Yuriy's firmware will work with both types.
The trick is, if you have magnetic type you will need the Mixed Scale firmware for the MSP430.
If you have the glass scales, you will probably need the Quadrature firmware.

If you know which type you have, Yuriy can direct you to the exact version of the firmware you need.
Regards,
Brian
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)