03-18-2017, 02:45 PM
I am not 100% certain what Yuriy is toggling the red LED on, he will have to answer that question, and I am sure it is based on which version of the firmware you have. The solid green LED is indeed the power indicator from the Emulation section of the board. There is another green LED on the MSP430G2 side of the board, right next to the red LED. As for what they toggle on, only Yuriy can answer that.
As for the push buttons, the Reset push button should work for it's designated purpose. I do not believe that function can be changed (I could be wrong, I haven't looked into changing it, myself).
I do not believe that Yuriy has built any functionality into P1.3, that's the other push button, but again, only Yuriy can answer that (being the programmer has its advantages
)
As for the push buttons, the Reset push button should work for it's designated purpose. I do not believe that function can be changed (I could be wrong, I haven't looked into changing it, myself).
I do not believe that Yuriy has built any functionality into P1.3, that's the other push button, but again, only Yuriy can answer that (being the programmer has its advantages

Regards,
Brian
Brian