09-19-2018, 11:26 PM
very similar path i took
![[Image: 41222075_2116164261735779_75720669424464...e=5C1E5226]](https://scontent.fagc1-2.fna.fbcdn.net/v/t1.0-9/41222075_2116164261735779_7572066942446469120_o.jpg?_nc_cat=0&oh=cc84005366510dcdf11d1e8e123fdaf0&oe=5C1E5226)
X is hidden under some alu angle, I added the power feed stops since.
![[Image: 41294045_2116164278402444_85612713117063...e=5C203061]](https://scontent.fagc1-2.fna.fbcdn.net/v/t1.0-9/41294045_2116164278402444_8561271311706357760_o.jpg?_nc_cat=0&oh=f835e61c9cf22b714353205da3dc2881&oe=5C203061)
the Y is on the side with a Z stock with a rubber flap.
My Z is very similar, I have a tach to add next
X is hidden under some alu angle, I added the power feed stops since.
the Y is on the side with a Z stock with a rubber flap.
My Z is very similar, I have a tach to add next