Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
question about the boards
#4
That's a cute little machine, but it must have been a real challenge to mount your scales. I have bought a couple of Proxxon tools for work. I just checked out some Youtube videos, and it looks like you have plenty of room to mount a sensor under the cover, and probably use the existing bolts for your cable clips. With the type of IR sensor that I used you will only need to drill and tap one hole. I used a short nylon standoff to space the board away from the gearbox housing. It looks like you have plenty of space to put some reflective tape on the spindle.
Reply


Messages In This Thread
question about the boards - by Maarten - 08-21-2017, 02:03 PM
RE: question about the boards - by Briney Eye - 08-23-2017, 02:46 PM
RE: question about the boards - by Maarten - 08-24-2017, 08:33 PM
RE: question about the boards - by Briney Eye - 08-25-2017, 04:04 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)