Forum
W axis as standard Axis / Tach calculation VC for latche - Printable Version

+- Forum (https://forum.yuriystoys.com)
+-- Forum: General Discussion (https://forum.yuriystoys.com/forumdisplay.php?fid=5)
+--- Forum: Feature Requests (https://forum.yuriystoys.com/forumdisplay.php?fid=7)
+--- Thread: W axis as standard Axis / Tach calculation VC for latche (/showthread.php?tid=540)



W axis as standard Axis / Tach calculation VC for latche - Gustlik - 01-08-2020

W axis set to normal mm/inch, no angular read - for lathe tailstock.


feed rate (VC) for rpm and X axis real time calculation (for lathe) or RPM / tool diameter for mill.
SFM = RPM * dia * pi / 12