Forum
Trying to get the Touch DRO with iGaging working, multiple issues - Printable Version

+- Forum (https://forum.yuriystoys.com)
+-- Forum: General Discussion (https://forum.yuriystoys.com/forumdisplay.php?fid=5)
+--- Forum: TouchDRO Boards and Kits (https://forum.yuriystoys.com/forumdisplay.php?fid=11)
+--- Thread: Trying to get the Touch DRO with iGaging working, multiple issues (/showthread.php?tid=145)



Trying to get the Touch DRO with iGaging working, multiple issues - heavyg603 - 03-21-2017

Just got my iGaging board in with the micro adapters.  The board boots up ok and goes into the slow blink quickly. Was also initially able to connect via bluetooth (1234 is the code in case someone finds this in the future).  Few questions and issues:

1.  The pinout on the USB breakout is 
      V
      D+
      D-
      ID
      GND
    
      This doesn't match what the TouchDRO board has exactly, I've tried both the D- and D+, no joy, nothing on the readout in terms of numbers changing

2. Now suddenly after I open the app and try and connect to board it I get the "Sorry touchDRO has stopped" and I get booted out.  Tried a bunch of stuff, disconnect the BT and tried again, still nothing.  Tablet is a RCA Voyager II with Android 5.0.  Tablet works fine with other BT devices.

3.  Looks like one scale in my set is a micro and not a mini like the other two, can I just use an adapter ?


Thanks in advance!


RE: Trying to get the Touch DRO with iGaging working, multiple issues - Yuriy - 03-21-2017

(03-21-2017, 02:38 AM)heavyg603 Wrote: Just got my iGaging board in with the micro adapters.  The board boots up ok and goes into the slow blink quickly. Was also initially able to connect via bluetooth (1234 is the code in case someone finds this in the future).  Few questions and issues:

1.  The pinout on the USB breakout is 
      V
      D+
      D-
      ID
      GND
    
      This doesn't match what the TouchDRO board has exactly, I've tried both the D- and D+, no joy, nothing on the readout in terms of numbers changing

2. Now suddenly after I open the app and try and connect to board it I get the "Sorry touchDRO has stopped" and I get booted out.  Tried a bunch of stuff, disconnect the BT and tried again, still nothing.  Tablet is a RCA Voyager II with Android 5.0.  Tablet works fine with other BT devices.

3.  Looks like one scale in my set is a micro and not a mini like the other two, can I just use an adapter ?


Thanks in advance!

1. The very first post on the blog home page covers connections schemes for all supported scale types.
2. Did you by chance switch to USB connection (from BlueTooth) or disabled BT in the settings? Try going to the app manager and clearing the data for TouchDRO. If that doesn't help, try restarting the tablet. I can see your error in the log, but it basically says that your tabled doesn't have the ability to list "supported devices". 


3. No, pin function are different. 

Regards
Yuriy


RE: Trying to get the Touch DRO with iGaging working, multiple issues - heavyg603 - 03-21-2017

Hi Yuriy,
1 ah!, I was in the wrong section.  Was on my phone reading it and missed that, sorry, but thanks for pointing me to it.  Reading now just fine.

2. No idea what happened on that.  I tried repair it (forget then pair), nothing.  I needed to uninstall and reinstall the app and bingo, got it right back.  Very strange.  Solid now.

3.  Ok, I'll get a board ASAP.  Cant believe they were mixed, I just grabbed one and checked when placed the order not thinking they would have different ones in the set I bought.

Thanks!
Gary