Forum

Full Version: DRO for BF20 mill optical scales
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Thanks Yuri and Lens42

Mi new Board for quadrature scales is finish
I have a question. 
in the squematic include an option for touch probe.

And in detail of the specifics of the new firm:Quandrature Firmware for MSP430 LaunchPad 1.2 is detailed that supports the touch probe, but I have a doubt, the app supports touch probe data or not yet,
I have not been able to clarify it. Thank you.

A consultation lens42
In your schematic you include between GNG and V5 4 capacitors 1.0uF and also between 3.3v and GND another two capacitors of 1.0uF, I have precided them because I did not have, what is its exact function?

Some photos of my project.

[Image: IMG_1396.JPG]
[Image: IMG_1399.JPG][Image: IMG_1403.JPG][Image: IMG_1401.JPG][Image: IMG_1402.JPG]
(01-08-2017, 07:04 PM)chapulino Wrote: [ -> ]Thanks Yuri and Lens42

Mi new Board for quadrature scales is finish
I have a question. 
in the squematic include an option for touch probe.

And in detail of the specifics of the new firm:Quandrature Firmware for MSP430 LaunchPad 1.2 is detailed that supports the touch probe, but I have a doubt, the app supports touch probe data or not yet,
I have not been able to clarify it. Thank you.

A consultation lens42
In your schematic you include between GNG and V5 4 capacitors 1.0uF and also between 3.3v and GND another two capacitors of 1.0uF, I have precided them because I did not have, what is its exact function?

Some photos of my project.

[Image: IMG_1396.JPG]
[Image: IMG_1399.JPG][Image: IMG_1403.JPG][Image: IMG_1401.JPG][Image: IMG_1402.JPG]

Nice build.
The capacitors are there to help with noise. They are not strictly necessary but helpful.
(01-10-2017, 03:30 AM)Yuriy Wrote: [ -> ]Nice build.
The capacitors are there to help with noise. They are not strictly necessary but helpful.

Thank Yuri . and this other question?

In detail of the specifics of the new firm:Quandrature Firmware for MSP430 LaunchPad 1.2 is detailed that supports the touch probe, but I have a doubt, the app supports touch probe data or not yet,

I have not been able to clarify it. Thank you.
And Now the tacho

[Image: IMG_1419.jpg]

https://youtu.be/pmO3UwiXz4E

runs 100% thanks Yuri