Forum

Full Version: arceurotrade dro
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
I want this DRO to connect to android. Which controller would it work?
http://www.arceurotrade.co.uk/Catalogue/...m-to-300mm

Thank you in advance too!
hi check YOUTUBE [ FIREBIRD4721] he is using scales you want to use good luck ted smith
Hi Tom

I use these scales on my lathe and also had them on my old milling machine.

http://www.arceurotrade.co.uk/Catalogue/...te-Display

I have them hooked up to a home made arduino based controller:

http://www.yuriystoys.com/p/arduino-basi...oller.html

but they will work with the standard / basic MSP430 controller as they use the same output format as the iguaging scales

http://www.yuriystoys.com/2016/01/touchd...aging.html

Hope that helps,

Jason
Thank you for helping both of you.
I bought this dro then I can use this with MSP430 LaunchPad Basic. It's right?

I bought from here: http://www.arceurotrade.co.uk.
Yep. That’s exactly the same as my scales.
(03-09-2018, 09:26 PM)GreatOldOne Wrote: [ -> ]Yep. That’s exactly the same as my scales.

Thany you!
I have some questions about parts

I bought MSP430.


Do not know if they will work?
https://www.amazon.de/gp/product/B00PL7S...VAXJ&psc=1
https://www.amazon.de/MagiDeal-Breakout-...kout+Board

What do you think?

Other question, Does HC-05 bluetooth work with it?
(03-23-2018, 07:42 PM)Tomizom Wrote: [ -> ]I have some questions about parts

I bought MSP430.


Do not know if they will work?
https://www.amazon.de/gp/product/B00PL7S...VAXJ&psc=1
https://www.amazon.de/MagiDeal-Breakout-...kout+Board

What do you think?

Other question, Does HC-05 bluetooth work with it?
Be careful! The break out board you linked to is Mini USB, not Micro USB. I have the same scales and my scales came with Micro USB, so you might want to check yours again.

The bluetooth module should work but it looks a tad over priced. I am saying "should work" as I tried forever to hook up a similar HC-06 module but turned out it was faulty. I bought a second one which worked right away. I can't recall if the HC-05 will work but if you search for it on Yuri's site there might be more info.