09-10-2023, 03:20 AM
I have a HiTorque mini mill with DRO installed by LMS 4 yers ago. Several weeks ago I began receiving a scale adapter connection error. I switched to a different updated Android tablet and installed TouchDRO. I continue seeing the same error prompt at Touch DRPO startup. The scale readers are connected with bright green lights. I was able to pair the vertical mill with the tablet but no luck with the scale adaptor connection issue.
How can I resolve this issue with the scale adapter connection?
I also need to change the value for Axis CPI to 5080.00. The TouchDRO menu settings are Workspace, Configuration, Tool Library and Settings. Which setting sub menu do I select to change the CPI value?
[attachment=267][attachment=268]
• What do I need to check or configure to reconnect ;to the scale adapter?
How can I resolve this issue with the scale adapter connection?
I also need to change the value for Axis CPI to 5080.00. The TouchDRO menu settings are Workspace, Configuration, Tool Library and Settings. Which setting sub menu do I select to change the CPI value?
[attachment=267][attachment=268]
• What do I need to check or configure to reconnect ;to the scale adapter?