Forum

Hi, I'm hoping Yuri can answer this for me:

My DIY build went together no problem. However, there is a solder bridge across the pads for pins 13 and 14 on the ESP chip.

I briefly checked the chip documentation and can't see a reason for shorting out the pair, but i wanted to check that it wasn't intentional before I got rid of it.

Thanks in advance.

(02-05-2023, 07:19 AM)artwchang Wrote: [ -> ]Hi, I'm hoping Yuri can answer this for me:

My DIY build went together no problem. However, there is a solder bridge across the pads for pins 13 and 14 on the ESP chip.

I briefly checked the chip documentation and can't see a reason for shorting out the pair, but i wanted to check that it wasn't intentional before I got rid of it.

Thanks in advance.

There should be no bridges, but you are the second person reporting a bridge across these pins. I checked the modules I have (around 230) and none of them have this bridge (I test them before shipping, but wasn't visually inspecting; apparently I need to...)

Regards
Yuriy